Modelcarfene S.L.

- Low-cost computer-controlled universal fast charger with integral lightweight switch-mode mains PSU
- For connection to 12 ... 15 V car battery or 100 ... 230 V AC. This charger is suitable for use with most rechargeable batteries commonly used in modelling, and is an excellent choice for all locations including abroad (USA / Japan).
- Ultra-simple to operate
- LED charge indicator forNiMH / NiCd or LiPo batteries
- Delta-Peak cut-off detector for NiCd and NiMH cells
- Switchable Delta-Peak voltage: 5 mV, 10 mV, 20 mV per cell
- Constant current /constant voltage charge process for LiPo cells
- Selectable charge current
- Attractive design

Ultra-simple operation based on clearly arranged program structure, 4-button terminal with user guidance and monitor dialogue.
High-contrast two-line LCD screen displays all relevant parameters simultaneously.
Charge / discharge facilities.
1 14 NiCd or NiMH cells.
1 ... 5 LiPo or NiMH cells.
2, 4, 6 and 12 V lead-acid batteries.
Charge current 100 mA ... 7 A.
Discharge current 10 mA ... 1 A.
Functions can be set to automatic or manual.
Delta-Peak cut-off detector for NiCd and NiMH cells; sensitivity can be set separately, ensuring full charges to 100% capacity.Charger can handle single cells: ideal for glow-start batteries and cell selection processes. Charger can charge 1 ... 3 LiPo cells using the constant current / constant voltage method. Declining curve after final charge voltage is reached, with automatic charge termination. Lead-acidcharge programs with optimised charge curve, discharge facility, variable discharge current to determine battery capacity and residual capacity. User settings: this program stores frequently used charge parameters. If the same packs are recharged repeatedly, the charge parameters do not need to be reprogrammed. Protected against short-circuit, overload and reversed polarity.Ready to use, maintenance-free.

sensitivity can be set separately, ensuring full charges to 100% capacity.
Charger can handle single cells: ideal for glow-start b

Operating voltage 12 V car battery
Car battery capacity min. 30 Ah
Charge / discharge facilities.
1 ... 12 NiCd or NiMH cells.
1 ... 5 LiPo or NiMH cells.
2, 4, 6 and 12 V lead-acid batteries.
Charge current 100 mA ... 3 A.
Discharge current 10 mA ... 500 m A.
Dimensions approx. 130 x 113 x 40 mm
Weight approx. 520g

Reasonably priced computer-controlled universal fast charger with integral lightweight switch-mode mains PSU. Suitable for 1 ... 14 NiCd / NiMH cells or 1 ... 5 LiPo or LiIo cells, as used in modelling. Can be connected to a 12 ... 15 V car battery or 100 - 240 V AC mains supply. The charger is a development of the proven and highly popularULTRAMAT 10, and is an excellent choice for use overseas (USA / Japan). For optimum safety and a long useful life of your LiPo and LiIo batteries, the LiPo Balancer plus, Order No. 3064, must be used.
- Ultra-simple to operate with its clearly arranged program structure and four-button terminal, with user guidance and monitor dialogue
- High-contrast two-line LCD screen displays all relevantparameters, including current, voltage, charge time, charged-in capacity
- Charges 1 ... 14 NiCd / NiMH cells
- Charges 1 ... 5 LiPo / LiIo cells
- Charge current 100 mA ... 5 A (max. 50 W)
- Delta-Peak cut-off detector for NiCd and NiMH cells, variable sensitivity for reliable full charges to 100% capacity
- Can charge single cells, therefore ideal for glowplug energizer batteries
- Attractive carbon fibre-look finish

High-performance automatic all-purpose charger; computer-controlled rapid-charge, discharge, capacity measurement, battery maintenance and cell balance unit for NiCd, NiMH and lead-acid batteries. Up to 5 A charge current. Up to 3 A discharge current. For 1 ... 25 NiCd or NiMH cells, 2 V ... 24 V lead-acid batteries. High-contrast 2-line LCD screen simultaneously displays all relevant parameters, including charge current, charge time, capacity, battery voltage, etc. Automatic battery detector senses size and cell count of the battery connected to it. Automatic current selector: selects appropriate charge current completely automatically. Delta-Peak cut-off detector with variable sensitivity for NiCd and NiMH packs. Reliably charges to 100% capacity. Charger can be used with single cells: ideal for glowplug batteries and cell selection processes. Capacity test programs with variable charge and discharge currents. Discharge programs with variable discharge currents and cut-off voltages. Lead-acid battery charge program with optimised charge curve, discharge facility, variable discharge current for determining battery capacity and residual capacity. Overcharge timer. Prevents premature termination after start of charge, and allows controlled overcharging for even greater battery power. Current limiter: variable maximum charge current for automatic programs. Simple to operate: clearly arranged 4-button terminal with user guide and monitor dialogue. Switchable deep-discharge protection for car battery. Rapid-charge safety timer prevents serious overcharging of defective packs. Buzzer setting: audible "ready" alert for end of charge program, selectable: off, 10 sec., continuous. Switchable button-press beep. Selectable charge start (immediate start when battery is connected, or command start when button is pressed). Power-ON program.Selectable charge program when power is connected. Reset menu for resetting user settings. Robust, practical aluminium case. Automatic trickle charge with variable trickle charge current. Trickle charge program for lead-acid batteries: long-term float charging keeps battery constantly at stand-by. Variable "cell balance" programs with variable cycle interval (up to 10 cycles), charge current, discharge current; capacity values can be displayed separately for each cycle (evenafter end of program). Protected against short-circuit, overload and reverse polarity. Ready to use, maintenance-free.